1/22/2023 0 Comments Jumping line on computer screenIf your monitor works fine on another computer, there may be a problem with the video card in the computer. If the monitor has the same distortion on another computer, you have a bad monitor. To verify if it's the monitor, connect the monitor to another computer. If yes, please consider replacing the monitor. The monitor would show the colored screen. Turn on the monitor by pressing the power button. If you checked the suggestions above and the issue continues to occur, the monitor is likely defective. Disconnect the DVI cable from the computer. To reduce or eliminate the flicker on the screen, adjust the refresh rate. An improper refresh rate may also cause a flickering effect on a CRT, LCD, or LED monitor. If you have an older CRT monitor and the refresh rate is not set properly, the display on the monitor may appear wavy. Verify no speakers, fans, or other magnetic devices are close to the monitor. InterferenceĪ distorted image can be caused by EMI (electromagnetic interference). Once verified, re-connect the monitor cable. Disconnect the video cable (usually a DVI, VGA, HDMI cable) going from the back of the computer to the monitor, and verify that no pins are bent, burnt or broken. Together Skip-Line and Spec-Rite deliver the data you need when you need it. You may receive a distorted image when the video cable is loose or defective. Skip-Line by Spec-Rite is the industry leader in pavement marking controls. How to fix distorted video after increasing resolution in Windows.Make sure your video drivers are up-to-date and that the video resolution is not set too high for the graphics card. If the display on the monitor looks fine until the computer starts to load Windows, you are encountering a video resolution or driver issue. If your monitor screen is black, see: No display or black screen on a computer monitor.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |